1产品图片Product Image
2产品介绍Products Introduction
三乐硅酸钙板的原材料由高纯度石英粉，高标号水泥，高纯度消石灰，加上石棉纤维及其他矿物添加物质组成，制作出来的硅酸钙板高韧性，高强度，高防水，坚固耐用。原材料按硅钙配比搅拌混合后，经抄取设备抄取制胚，其后一天的高压蒸养使其硅钙反应成“托贝莫来石”而硬化。从原材料处理到正压后板成品加工，每一道工序均严格控制，保证市场提供品质稳定优良的通用硅酸钙板材。
The raw mater ial of Sanle calcium silicate board are high-purity quartz flour,high grade Portland cement, high-purity slaked lime,plant fiber and other mineral added substance.After agitating and mixing calcium and silicate at a ratio,we make the raw material into a wet sheet and then through one day high temperature autoclave by advanced technology to make the calcium silicate react to Tobermorite to have the final product.From handling the raw material to processing semi-finished product,every procedure is under strict control to guarantee that supplying high quality calcium silicate board.

3产品特点Product Features
　　纤维增强硅酸钙板属于轻质高强建筑材料，施工方便，加工性能好，可锯，可钉，不易产生翘曲和裂缝，表面可涂刷涂料或粘贴壁纸和瓷砖，并且不怕虫蛀，不会发热，其隔热，隔声性能，对温度变化的稳定性均可满足建筑物的使用要求。特别是具有良好的防火性能，不会爆裂，当发生火灾时有较长时间安全撤离火灾区。
总体来说：三乐硅酸钙板 轻质高强 坚固耐用 隔声隔热 防蛀防腐 可刻可锯可钻 易施工 易装饰 变形系数小
Fire proof
Sanle calcium silicate board is fire resistance material.When fire happens,not only the place occurs the fire,but also the place fire spreads to will be damaged and will bring loss,therefore,the fire resistance of outer wall is very important.Sanle calcium silicate board is with excellent fire resistance character.In addition,it will be not causing crack and stratification after fire.
Anticorrosive
Sanle calcium silicate board is without any growth condition for fungus,and it will not be mildew in any circumstance.
Resistant to insect and termite
Under 11pa steam curing,the Sanle calcium silicate board is hardening.Its own structural property decides that the insect and termite can not survive in the board.
Light weight & high strength
The wall,hang ceiling or other structural parts,which is fast.It is can be installed with ordinary wood working tool.The board is easy to be processed.
Easy working
The instanllation of board is dry construction, which is fast. It is can be installed with ordinary wood working tool.The board is easy to be processed.
Easy decoration
Various decorative processing can be made for the board surface,such as coating materials or all kinds of adhesive.
Small deformation coefficient
The materials of Sanle calcium silicate board are cement,quartz flour, natural xylem fiber and other minerals. Under high temperature autoclave, the calcium from the cement and the silicate from the quartz flour will react to form a new crystal "tobermorite".It will harden within 24 hours after molding, therefore the shape of board is steady and deformation coefficient is small.
4产品规格Product Specifications
5技术参数Product parameter
注： （表格中e是厚度） 如需查看检测报告正本扫描档案，请联系我公司人员获取！
6应用范围Main functions
三乐硅酸钙板可用于内外墙，吊顶，活动地板，厨厕墙板，轮船和地铁工程板材，高层建筑上下水通道隔板，也可以作家具衬板，防火衬板，广告牌，物柜板。
7建议使用场所Recommendable applications
商用建筑：商务大厦、娱乐场所、商场、酒店
工业建筑：工厂、仓库
住宅建筑：新型住宅、装修翻新
公共场所：医院、剧院、车站
8搬运加工安装指引Transportation cutting installation lead
运输与搬运
工厂交货时的三乐硅酸钙板板材是采用板对板的堆垛储存方式。这种状态也适合海运，铁路运输，公路运输和室内储存。
三乐硅酸钙板板材在存储状态中不适合置于室外或者有可能令产品接触水的仓库。三乐硅酸钙板板材必须存储于坚实，平整的地面，无漏水的，无尘通风的室内仓库中。应避免在存储状态中受潮，万一发生受潮，应立即抹干三乐硅酸钙板板材并置于通风良好的地方晾干。否则，板材可能收到损坏。搬运时注意要项：
1.禁止单人搬运，注意边角保护；
2.需要两名工人在宽度方向一起将三乐硅酸钙板抬起，双手尽量分开，托起板的长边，直立进行搬运，防止板材过度弯曲；
3.厚度不到8mm的板材在搬运时，建议每次两片重叠搬运；
4.存放时，保证底部平整，每垛高度≤800mm，储放垛数不超过三垛；
5.不能零散直立放置板材，应按规格、种类整齐平叠堆放；
6.储放处必须干燥，无漏水，渗水现象，保证板材的优越性能。
加工方法
手工切割三乐硅酸钙板材，可用一般的薄片锯或手锯完成。如大量板材需要现场切割时，建议使用电动圆盘齿锯。切割锯片是直齿的碳化钨合金制成。对圆形或弧形的切割可采用电动曲线锯进行施工。
可用电钻或开孔器在板面上钻圆孔或开方孔。
切割地点建议选在具有良好通风效果的地方。选用带收尘设备的切割器，工人应佩带口罩，以保护环境及员工的健康。
隔墙安装
1.通常情况下，作隔墙的三乐硅酸钙板采用纵向排布，即板的长边落在竖龙骨上；
2.三乐硅酸钙板对接时要自然靠近，不得强压就位；
3.特别注意门窗处三乐硅酸钙板的排放，注意板缝不能落在平行于门边框，或窗边框的龙骨上，以避免由于门窗的经常开关产生震动而造成三乐硅酸钙板缝开裂；
4.三乐硅酸钙板的两条长边都已倒角，如果墙体高于2440mm时，三乐硅酸钙板水平接合的短边必须现场倒角（刨成宽度约25mm的斜边），以便更好的处理接缝。
5.弹线并标注板的固定点，同时作钻孔处理（孔径比螺钉头略大1-2mm，孔深1-2mm）固定点距板角40-55mm，固定点间距250-300mm。
6.固定三乐硅酸钙板时，板与龙骨应做与钻孔，其孔径应比螺丝直径小1mm，用自攻钉固定时，应从板的中部向周边固定，且所有螺钉头均沉入板面1mm。在紧固时，板材必须与龙骨架钉牢。
Transportation
When delivery, the boards should be piled up in the way of board-to-board, then it is suitable for overseas transportation, road transportation and indoor store.
The panels could not be stored outside or in the store near water. It must be stored in a smooth, no rain leaking, no dust and good ventilated warehouse. It should avoid moisture before used.Once it was affected with damp, it should be cleaned up right away and sent it to a well ventilate area for drying up. Otherwise it may be destroyed.
Caution for transportation and store:
1.Carried by one man is prohibited, the edges and comers must be well protected.
2.Two workers are needed to lift the board together.They must separate their hands as much as possible and raise the length edges of the board in vertical so as to prevent the board from being bent too much.
3.Once the thickness of the board is less than 8mm, please carry two boards each time.
4.When storing, the bottom should be kept flat, the height of each stack should be not more than 800mm, and the total amount of storing should be not more than three.
5.The calcium silicate board can not be erectly scattered, on the contrary, the boards should be piled in order and according to their specification and type.
6.A dry depositary without water leakage and sink store must be chosen to ensure outstanding capabilities of Sanle calcium silicate board.
Cutting
Board can be cut manually with common flaky saws or handsaws.If a large amount of boards should be cut at the working site electric circular saws are suggested.The cutting saw blade is made of carbonized tungalloy. Moreover, cutting round and arc-shaped boards can be done with electric curvilinear saws.
Electric drills or tapers can be used for circular or rectangular holes as needed on the board surface.
Breezy spot is suggested as the site for cutting. In addition, cutters with the fuction of dust collection should be used, workers should wear respirators during processing, then the environment and health of the employees can be guaranteed.
Guide of installation and application for partition:
1.Generally, Sanle calcium silicate board which is used for partition is installed in vertiacal. That is to say, the length edge should be installed on the C Profile.
2.The panels are supposed to be approached naturally when they ard joined and forcible press should be avoided.
3.We have to pay special attention to the arrangement of panels near the windows and doors. The space of the panels should not be horizontal with the profile on frame of doors or windows in order to avoid the crack while shaking caused by opening or closing.
4.The two length edges of each panel are beveled edge. If the partition is higher than 2440mm, the shorter edge should be jointed horizontally on the spot(the bevel edges should be about 25mm in width)to make better sealing.
5.Snapping lines and marking fixed points for the panels, afterwards making a hole in advance(1-2mm in diameter, slightly bigger than screw head, and 1-2mm in depth). The fixed point should be 40-55mm to the corner of the board and the space between the fixed points should be 250-300mm.
6.Before the panels are fixed, it should be holed in advance on both the board and the profile. The size of the hole should be fixed from its center to edges, each screw should be enter into the board by 1mm. When fixing, please tight the panels and profile.
Guide of profile installation for ceiling
1.First, we should draw the installation guideline to confirm the fixing position according to the draft and the indoor condition (the distance between the fixing points is ≤1222mm).
2.Fixing the main profile on the bottom of the floor horizontally with hanging wire and hanger, the central distance between the main profiles is ≤1222mm, while the space between the end of the profile and the partition should be 10mm.
9备注Remark
如客户需其他幅面尺寸，企业可代为切割；特殊规格可以预定加工。
10工程图片Project picture
联系人：一三四六三四三零六六六