收藏本页 | 设为主页 | 随便看看| 防火资源网首页
2

江冬秀(个人)

新闻中心
  • 暂无新闻
产品分类
  • 暂无分类
站内搜索
 
友情链接
  • 暂无链接
您当前的位置:首页 » 产品中心 » ISO 75-2塑料.载荷下挠曲温度的测定.第2部分
ISO 75-2塑料.载荷下挠曲温度的测定.第2部分
点击图片查看大图
产品/服务: 浏览次数:103ISO 75-2 
型 号: ISO 75-2 
规 格: PCS 
品 牌: CASfire 
单 价: 面议 
最小起订量:  
供货总量:
发货期限: 自买家付款之日起 3 天内发货
更新日期: 2022-01-13  有效期至:长期有效


«上一个产品     下一个产品»
详细信息
 

ISO 75-2塑料.载荷下挠曲温度的测定.第2部分—标准名称

ISO 75-2 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

ISO 75-2塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶

ISO 75-2塑料.载荷下挠曲温度的测定.第2部分—适用范围

Scope

This part of ISO 75 specifies three methods, using different values of constant flexural stress, which can be used for the determination of the temperature of deflection under load of plastics (including filled plastics and fibre-reinforced plastics in which the fibre length, prior to processing, is up to 7,5 mm) and ebonite: method A, using a flexural stress of 1,80 MPa; method B, using a flexural stress of 0,45 MPa; method C, using a flexural stress of 8,00 MPa.

ISO 75-2塑料.载荷下挠曲温度的测定.第2部分—引用文件

ISO 75-1, Plastics—Determination of temperature of deflection under load — Part 1: General test method

ISO 293, Plastics — Compression moulding of test specimens of thermoplastic materials

ISO 294-1, Plastics—Injection moulding of test specimens of thermoplastic materials—Part 1: General principles, and moulding of multipurpose and bar test specimens

ISO 2818, Plastics—Preparation of test specimens by machining

ISO 10724-1, Plastics—Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs)—Part 1: General principles and moulding of multipurpose test specimens

ISO 20753, Plastics—Test specimens

ISO 75-2塑料.载荷下挠曲温度的测定.第2部分—相关标准

ASTM D648塑料侧立式弯曲负荷下变形温度的标准测试方法/Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

ISO 75-2塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶/Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

GB/T 1634.2塑料 负荷变形温度的测定 第2部分:塑料和硬橡胶/Plastics-Determination of temperature of deflection under load-Part 2: Plastics, ebonite and long-fibre-reinforced composites

GB/T 17748建筑幕墙用铝塑复合板/Aluminium-plastic composite panel for curtain wall

ASTM D1784硬质聚氯乙烯(PVC)化合物和氯化聚氯乙烯(CPVC)化合物的标准规格/Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

     详情请咨询:中科易朔防火技术服务有限公司
     出自GF2022