ASTM D6740 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
ASTM D6740橡胶加工制剂中硅烷的标准试验方法(bis-(triethoxysilylpropyl)sulfanes):灼烧残余物
The residue on ignition, which consists essentially of SiO2, is related to the silicon content of the silane and may be used to verify the composition of the silane.
1. Scope
1.1 This test method covers the determination of the residue on ignition of silanes of the type bis-(triethoxysilylpropyl)sulfane, or of admixtures of these silanes and solid carriers, such as carbon black, waxes, or organic polymers.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately)
ASTM Standards
E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Index Terms
ash; organosilanes; silanes; Ash--rubber; Organosilanes; Residue on ignition; Rubber chemicals; Silanes/Siloxane; bis-(Triethoxysilypropyl) sulfanes;
