点击图片查看原图
基础创新PC/ABS合金 CYCOLOY C6200F 产品特性：无卤防火，5VA阻燃，良好的流动性，良好的抗冲击性，抗裂性好，中等耐热性
我公司提供的产品均为正牌塑胶原料，品质保证，货源稳定，送货上门，可免费提供官方物性表、UL黄卡，并随货提供RoHS报告、SGS报告等，索取权威资料请致电13268582149
PC/ABS C6200F 物性表：
| Physical | Nominal Value | Unit | Test Method |
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/2.16 kg) | 15 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 0.40 to 0.60 | % | Internal Method |
| Molding Shrinkage - Across Flow (3.20 mm) | 0.40 to 0.60 | % | Internal Method |
| Spiral Flow Length 2 (260°C) | 686 | mm | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Strength 3 (Yield) | 66.9 | MPa | ASTM D638 |
| Tensile Elongation 3 (Break) | 50 | % | ASTM D638 |
| Flexural Modulus 4 (100 mm Span) | 2690 | MPa | ASTM D790 |
| Flexural Strength 4 (Yield, 100 mm Span) | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
| Notched Izod Impact (23°C) | 530 | J/m | ASTM D256 |
| Instrumented Dart Impact | ASTM D3763 | ||
| -30°C, Energy at Peak Load | 54.2 | J | |
| 23°C, Energy at Peak Load | 61.0 | J | |
| Thermal | Nominal Value | Unit | Test Method |
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed, 3.20 mm | 87.8 | °C | |
| 1.8 MPa, Unannealed, 6.40 mm | 90.6 | °C | |
| Electrical | Nominal Value | Unit | Test Method |
| Surface Resistivity | > 1.0E+15 | ohm | IEC 60093 |
| Volume Resistivity | > 1.0E+15 | ohm·cm | IEC 60093 |
| Relative Permittivity | IEC 60250 | ||
| 50 Hz | 2.80 | ||
| 60 Hz | 2.80 | ||
| 1 MHz | 2.70 | ||
| Dissipation Factor | IEC 60250 | ||
| 50 Hz | 0.0040 | ||
| 60 Hz | 0.0040 | ||
| 1 MHz | 0.0080 | ||
| Arc Resistance (PLC) 5 | PLC 6 | ASTM D495 | |
| Electric Strength | IEC 60243-1 | ||
| 0.800 mm, in Oil | 35 | kV/mm | |
| 1.60 mm, in Oil | 25 | kV/mm | |
| 3.20 mm, in Oil | 17 | kV/mm | |
| Flammability | Nominal Value | Unit | Test Method |
| Flame Rating - UL | UL 94 | ||
| 0.711 mm | HB | ||
| 1.47 mm | V-0 | ||
| 1.22 mm | V-1 | ||
| 3.40 mm | 5VA |
PC/ABS 德国拜耳 FR2010 通用注塑级
PC/ABS 德国拜耳 FR3000 通用注塑级透明 汽车零件
PC/ABS 德国拜耳 FR3010 通用注塑级本色 高耐热，良好的耐化学性，无锑，无卤，无溴，阻燃
PC/ABS 德国拜耳 FR3020 通用注塑级本色 矿物填充，无卤，无溴，阻燃
PC/ABS 德国拜耳 T-44 通用注塑级
PC/ABS 德国拜耳 T-45MN 通用注塑级
PC/ABS 德国拜耳 T-45PG 通用注塑级本色 电镀应用
PC/ABS 德国拜耳 T-65 通用注塑级本色 耐低温冲击强度，一般目的
PC/ABS 德国拜耳 T-65MN 通用注塑级
PC/ABS 德国拜耳 T-65-XF 通用注塑级本色 改良流动性，一般用途
PC/ABS 德国拜耳 T-85 通用注塑级本色 高耐热，高抗冲及缺口冲击强度，一般目的
PC/ABS 德国拜耳 T85-XF 通用注塑级本色 良好的流动性
PC/ABS 德国拜耳 T85MN 通用注塑级
PC/ABS 德国拜耳 T88-2N 通用注塑级
PC/ABS 德国拜耳 T88-4N 通用注塑级
PC/ABS 德国拜耳 T95 通用注塑级本色 良好的流动性
